Ops

Overview • About • Close • Defs • Libs • Ops • Filetypes • Read • Nav • WatchSub • WatchUnsub • WatchPoll • PointWrite • HisRead • HisWrite • Invoke Action

Overview

This chapter defines the standardized operations of the Haystack HTTP API. Each operation specifies the format and options of the request grid and response grid.

About

The about op queries basic information about the server.

Request: empty grid

Response: single row grid with following columns:

  • haystackVersion: Str version ph library
  • tz: Str of server's default timezone
  • serverName: Str name of the server or project database
  • serverTime: current DateTime of server's clock
  • serverBootTime: DateTime when server was booted up
  • productName: Str name of the server software product
  • productUri: Uri of the product's web site
  • productVersion: Str version of the server software product
  • vendorName: Str name of product's company
  • vendorUri: Uri of the vendor's web site
  • moduleName: module that implements Haystack server protocol if its a plug-in to the product
  • moduleVersion: Str version of moduleName

Example:

// request
GET /haystack/about
Accept: text/trio

// response in Trio
haystackVersion:"4.0"
tz: "New_York"
serverName: "Test Server"
serverTime: 2021-05-31T07:50:17-04:00 New_York
serverBootTime: 2021-05-28T06:50:47-04:00 New_York
productName: "Acme Haystack Server"
productUri: `http://acme.com/haystack-server`
productVersion: "1.0.30"
vendorName: "Acme"
vendorUri: `http://acme.com/`

Example response as grid:

Zinc JSON 
ver:"3.0"
haystackVersion,tz,serverName,serverTime,serverBootTime,productName,productUri,productVersion,vendorName,vendorUri
"4.0","New_York","Test Server",2021-05-31T07:50:17-04:00 New_York,2021-05-28T06:50:47-04:00 New_York,"Acme Haystack Server",`http://acme.com/haystack-server`,"1.0.30","Acme",`http://acme.com/`

Close

The close op closes the current authentication session. Sessions are established by the auth handshake and identified by the bearer token. Calling this op should close the session on the server and invalidate the bearer token.

Request: empty grid

Response: empty grid

Example close request using Zinc:

POST /haystack/close HTTP/1.1
Authorization: bearer authToken=xyz
Content-Length: 17
Content-Type: text/zinc; charset=utf-8

ver:"3.0"
empty

Example close request using JSON:

POST /haystack/close HTTP/1.1
Authorization: bearer authToken=xyz
Content-Length: 81
Content-Type: application/json

{
"_kind": "grid",
"meta": {"ver":"3.0"},
"cols": [{"name":"empty"}],
"rows":[]
}

Defs

The defs op queries def dicts from the current namespace.

Request (all defs): empty grid

Request (by filter): filter or limit which defs are queried

  • filter: Str encoding of filter
  • limit: optional Number that specifies maximum number of defs to return in response

Response: a grid with the dict representation of each def

Example request:

Zinc JSON 
ver:"3.0"
filter
"def==^point"

Example response:

Zinc JSON 
ver:"3.0"
def,lib,is,mandatory,docTaxonomy,doc
^point,^lib:phIoT,[^entity],M,M,"Data point such as a sensor or actuator.\nSee `docHaystack::Points` chapter."

Libs

The libs op queries lib defs from current namspace. It follows the same convention as the defs op except only lib defs are queried.

Ops

The ops op queries op defs from current namspace. It follows the same convention as the defs op except only op defs are queried.

Filetypes

The filetypes op queries filetype defs from current namspace. It follows the same convention as the defs op except only filetype defs are queried.

Read

The read op is used to read a set of entity records either by their unique identifier or using a filter.

Request (by filter): a grid with a single row and following columns:

  • filter: required Str encoding of filter
  • limit: optional Number that specifies maximum number of entities to return in response

Request (by id): a grid of one or more rows and one column:

  • id: a Ref identifier

Response: grid with a row for each entity read. If the request is a filter read and no matches were found, this will be an empty grid with no rows. If a read by id, then each row corresponds to the request grid and its respective row ordering. If an id from the request was not found, the response includes a row of all null cells.

Example of filter read request:

Zinc JSON 
ver:"3.0"
filter,limit
"point and siteRef==@siteA",1000

Example of read by id with three identifiers:

Zinc JSON 
ver:"3.0"
id
@vav101.zoneTemp
@vav102.zoneTemp
@vav103.zoneTemp

Example of a read response where an id is not found:

Zinc JSON 
ver:"3.0"
id,dis,curVal
@vav101.zoneTemp, "VAV-101 ZoneTemp",74.2°F
N,N,N
@vav103.zoneTemp, "VAV-103 ZoneTemp",73.8°F

Note: a read operation on points returns the last known values for curVal and curStatus. It does not force cur value refresh from downstream data sources. For those cases you must use the watchSub operation.

The nav op is used navigate a project for learning and discovery. This operation allows servers to expose the database in a human-friendly tree (or graph) that can be explored.

Request: a grid with a single row and a navId column. If the grid is empty or navId is null, then the request is for the navigation root.

Response: a grid of navigation children for the navId specified by the request. There is always a navId column that indicates the opaque identifier used to navigate to the next level of that row. If the navId of a row is null, then the row is a leaf item with no children.

Navigation rows don't necessarily always correspond to records in the database. However, if the navigation row has an id column, then it is safe to assume the row maps to a record in the database. Clients should treat the navId as an opaque identifier.

WatchSub

The watchSub operation is used to create new watches or add entities to an existing watch.

If the entities subscribed are themselves proxies for external data sources, then this operation should perform a downstream data refresh. For example, if a Haystack gateway is used to proxy BACnet points, then a watch subscription to the Haystack points might initiate a poll or COV subscription to the downstream BACnet points. It is an implementation detail whether the data refresh occurs synchronously or asynchronously. Clients should expect that the latest data might not be available until a subsequent watchPoll operation.

Request: a row for each entity to subscribe to with an id column of Ref values. In addition, the following grid metadata is specified:

  • watchDis: debug/display string required when creating a new watch
  • watchId: Str watch identifier, which is required to add entities to existing watch. If omitted, the server must open a new watch.
  • lease: optional Number with duration unit for desired lease period (server is free it ignore)

Response: rows correspond to the current entity state of the requested identifiers using same rules as read op: each response row corresponds to the request grid and its respective row ordering. If an id from the request was not found, the response includes a row of all null cells. Grid metadata is:

  • watchId: required Str identifier of the watch
  • lease: required Number with duration unit for server assigned lease period

If the reponse is an error grid, then the client must assume the watch is no longer valid, and open a new watch.

It is possible that clients may use an id for the subscription that is not the server's canonical id (for example if multiple aliases might be used to reference an entity). The canonical id is the one returned by the server in the watchSub response. Servers must use this same id during watchPoll operations. Clients must not assume that the id used by the watchSub request is the same id used by the watchSub response and watchPoll responses. However, the order of rows in watchSub request/response is guaranteed to allow clients to perform a mapping.

Example request to create a new watch:

Zinc JSON 
ver:"3.0" watchDis:"MyApp" lease:1min
id
@2b80f96a-9dcc2202
@2b80f96a-7b16eb30

Example response:

Zinc JSON 
ver:"3.0" watchId:"w-2bfe7e77-8a7c55ab" lease:1min
id,cur,curStatus,curVal,equipRef,kind,point,unit
@2b80f96a-9dcc2202 "RTU-1 ReturnTemp",M,"ok",68.2°F,@2b80f96a-ee1d1270 "RTU-1","Number",M,"°F"
@2b80f96a-7b16eb30 "RTU-1 ZoneTemp",M,"ok",74.1°F,@2b80f96a-ee1d1270 "RTU-1","Number",M,"°F"

Example request to add a record to existing watch:

Zinc JSON 
ver:"3.0" watchId:"w-2bfe7e77-8a7c55ab"
id
@2b80f96a-9dcc3345

WatchUnsub

The watchUnsub operation is used to close a watch entirely or remove entities from a watch.

Request: a row with the id column and Ref values for each entity to unsubscribe (if the watch is not be closed). Grid metadata:

  • watchId: Str watch identifier
  • close: Marker tag to close the entire watch

Response: empty grid

If the reponse is an error grid, then the client must assume the watch is no longer valid, and open a new watch.

Example request to unwatch one record:

Zinc JSON 
ver:"3.0" watchId:"w-2bfe7e77-8a7c55ab"
id
@2b80f96a-9dcc2202

Example request to close a watch:

Zinc JSON 
ver:"3.0" watchId:"w-2bfe7e77-8a7c55ab" close
id

Example response:

Zinc JSON 
ver:"3.0"
empty

WatchPoll

The watchPoll operation is used to poll a watch for changes to the subscribed entity records.

Request: grid metadata:

  • watchId: required Str identifier of the watch
  • refresh: Marker tag to request full refresh

Reponse: grid where each row correspondes to a watched entity. The id tag of each row identifies the changed entity and correlates to the id returned by watchSub response. Clients must assume no explicit ordering of the rows. If the poll was for changes only, only the changed entities since last poll are returned. If no changes have occurred, then an empty grid is returned. If the poll is a full refresh, then a row is returned for each entity in the watch (invalid identifiers are not be included).

If the reponse is an error grid, then the client must assume the watch is no longer valid, and open a new watch.

Request grid:

Zinc JSON 
ver:"3.0" watchId:"w-2bfe7e77-8a7c55ab"
empty

Response grid:

Zinc JSON 
ver:"3.0" watchId:"w-2bfe7e77-8a7c55ab"
id,cur,curStatus,curVal,equipRef,kind,point,unit
@2b80f96a-9dcc2202 "RTU-1 ReturnTemp",M,"ok",68.2°F,@2b80f96a-ee1d1270 "RTU-1","Number",M,"°F"
@2b80f96a-7b16eb30 "RTU-1 ZoneTemp",M,"ok",74.1°F,@2b80f96a-ee1d1270 "RTU-1","Number",M,"°F"

PointWrite

The pointWrite op is used to:

  1. read the current status of a writable point's priority array
  2. Or write to a given level

To read the priority array:

Request (read): a grid with a single row and following columns:

  • id: Ref identifier of writable point

Response: returns a grid with current priority array state with following columns:

  • level: number from 1 - 17 (17 is default)
  • levelDis: human description of level
  • val: current value at level or null
  • who: who last controlled the value at this level

To write a level in the priority array:

Request (write): a grid with a single row and following columns:

  • id: Ref identifier of writable point
  • level: Number from 1-17 for level to write
  • val: value to write or null to auto the level
  • who: optional username/application name performing the write, otherwise authenticated user display name is used
  • duration: Number with duration unit if setting level 8

Response: empty grid

Example request to issue a point write:

Zinc JSON 
ver:"3.0"
id,val,level,who
@2b80f96a-d372482e,72°F,16,"Alice"

Example response:

Zinc JSON 
ver:"3.0"
empty

HisRead

The hisRead op is used to read a time-series data from one or more historized points. This operation supports both a single point read and a batch point read. The mode is determined by the presense of the range tag in the request grid meta.

Single HisRead

A single point read request:

Request: a grid with exactly one row and following columns:

  • id: Ref identifier of historized point
  • range: Str encoding of a date-time range

Response: rows of the result grid represent timetamp/value pairs with a DateTime ts column and a val column for each scalar value. In addition the grid meta includes:

  • id: Ref of the point we read
  • hisStart: DateTime timestamp for inclusive range start in point's timezone
  • hisEnd: DateTime timestamp for exclusive range end in point's timezone

The range Str is formatted as one of the following options:

  • "today"
  • "yesterday"
  • "{date}"
  • "{date},{date}"
  • "{dateTime},{dateTime}"
  • "{dateTime}" // anything after given timestamp

Ranges are inclusive of start timestamp and exclusive of end timestamp. The {date} and {dateTime} options must be correctly Zinc encoded. Date based ranges are always inferred to be from midnight of starting date to midnight of the day after ending date using the timezone of the his point being queried.

Clients should query the range using the configured timezone of the point. Although if a different timezone is specified in the range, then servers must convert to the point's configured timezone before executing the query. Results are always in the point's configured timezone.

Example request:

Zinc JSON 
ver:"3.0"
id,range
@someTemp,"2012-10-01"

Example response:

Zinc JSON 
ver:"3.0" id:@someTemp hisStart:2012-10-01T00:00:00-04:00 New_York hisEnd:2012-10-02T00:00:00-04:00 New_York
ts,val
2012-10-01T00:15:00-04:00 New_York,72.1°F
2012-10-01T00:30:00-04:00 New_York,74.2°F
2012-10-01T00:45:00-04:00 New_York,75.0°F

Batch HisRead

Clients can request a batch hisRead using the following request format:

Request: a grid with one or more rows

  • meta.range: Str encoding of a date-time range in grid meta
  • meta.tz: optional Str timezone name in grid meta
  • id: one or more Ref identifiers of historized points

Response: rows of the result grid represent timetamp/value pairs with a DateTime ts column and one or more value columns named "v0", "v1", "v2", etc. Value column meta must include the point id tag. Value columns must be ordered according the request grid. The grid meta includes the queried span:

  • id: Ref of the point we read
  • hisStart: DateTime timestamp for inclusive range start
  • hisEnd: DateTime timestamp for exclusive range end

The results are joined by a shared ts column for each unique timestamp in the result set. If a given point does not have a sample for one of the rows, then its cell will be null.

Batch read requires that all the queried points have the same configured timezone. The results are returned in this shared timezone. Alternatively specify an explicit timezone name for the results in the request grid meta via the tz tag.

Example request:

Zinc JSON 
ver:"3.0" range:"2012-10-01"
id
@hisA
@hisB
@hisC

Example response:

Zinc JSON 
ver:"3.0" hisStart:2012-10-01T00:00:00-04:00 New_York hisEnd:2012-10-02T00:00:00-04:00 New_York
ts,                                  v0 id:@hisA,  v1 id:@hisB,  v2 id:@hisB
2012-10-01T00:15:00-04:00 New_York,  72.1°F,       10%,          80°F
2012-10-01T00:30:00-04:00 New_York,  73.0°F,       N,            N
2012-10-01T00:45:00-04:00 New_York,  N,            20%,          N

HisWrite

The hisWrite op is used to post new time-series data to one or more historized points. The points must already be configured on the server and assigned a unique identifier.

The hisWrite operation supports both a single write and a batch write. The mode is determined by the presence of an id tag in the request grid meta.

Single HisWrite

The following request format is used to post history data to a single point:

Request: a grid metadata must define id Ref of the point. The rows define new timestamp/value samples to write with following columns:

  • ts: DateTime timestamp of sample in point's timezone
  • val value of each timestamp sample

Response: empty grid

Clients should attempt to avoid writing duplicate data. But servers must gracefully handle clients posting out-of-order or duplicate history data. The timestamp and value kind of the posted data must match the entity's configured timezone and kind. Numeric data posted must either be unitless or must match the entity's configured unit. Timezone, value kind or unit conversion is explicitly disallowed.

Example:

Example request:

Zinc JSON 
ver:"3.0" id:@hisId
ts,val
2012-04-21T08:30:00-04:00 New_York,72.2
2012-04-21T08:45:00-04:00 New_York,76.3

Example response:

Zinc JSON 
ver:"3.0"
empty

Batch HisWrite

Clients can post a batch of history data via the hisWrite op using this request format:

Request: Omit the grid meta id and instead add multiple value columns where the id is specified in the column meta:

  • ts: DateTime timestamp
  • v{i} value column for each point, column meta must define id tag

Response: empty grid

A batch hisWrite requires that all points be in the same timezone. If a point does not have a sample for a given timestamp/row then specify null for that cell.

Example request:

Zinc JSON 
ver:"3.0"
ts,                                 v0 id:@hisA,  v1 id:@hisB
2012-04-21T08:30:00-04:00 New_York, 72.2,         10
2012-04-21T08:45:00-04:00 New_York, 76.3,         N
2012-04-21T09:00:00-04:00 New_York, N,            12

Example response:

Zinc JSON 
ver:"3.0"
empty

Invoke Action

The invokeAction op is used to invoke a user action on a target record. Actions may be used to change setpoints or initiate other types of configuration/control actions. An action is modeled a function which takes zero or more parameters. The arguments for the action's parameters are passed in the request. It is a server local matter to decide what actions are available on a given target and how they are parameterized.

Request: grid metadata must define id Ref of target rec and action Str name. A single row defines the arguments to the action.

Response: undefined

Haxall 3.1.10 ∙ 28-Jun-2024 15:01 EDT